Information about the forex board

Forex board has high environmental protection, no pollution, no pollution, and can be recycled. Forex board products do not contain benzene, the formaldehyde content is 0.2, which is lower than the EO grade standard, which is the European environmental protection standard. The recyclable utilization greatly saves the amount of wood used, which is suitable for the national policy of sustainable development and benefits society. Next, let's take a look at the relevant information on the forex board.

Here is the content list:

• Routine maintenance of forex board.

• The problem encountered during the extrusion of the forex board.

Routine maintenance of forex board.

Forex board is now a commonly used insulation board. When we use it, to enable it to be used for a long time, we must pay attention to its regular maintenance, otherwise, it will cause unnecessary losses. The so-called routine maintenance means that when we use the forex board at ordinary times, we should make it have a clean surface, and in order not to affect its use, we need to master its performance. The maintenance of forex boards is very important, and we can only maintain them by conventional methods to make these boards have a longer service life.

Because the structure of the forex board is relatively simple, its maintenance is not very complicated, but we need to maintain it regularly. If there is grit on the forex board we use, we need to clean it up in time, the only way to reduce their damage to the forex board. If the hard object damages the surface of the PVC foam board, it will affect the appearance and change the structure of the board. If it is used as a board surface, we also need to regularly use a curing agent for surface maintenance, which can effectively protect the surface gloss of the board. If it is a board and board used in different places, the maintenance agent should also be selected according to its processing technology. Try to use a neutral detergent. You need to use a semi-dry mop to clean the surface of the contamination. It is not necessary to clean it every day, but you need to clean it up immediately when you find that the surface is contaminated. When the forex board is in use, it is necessary to avoid direct exposure to strong light, which can also prevent the damage of ultraviolet rays. If it is used in an environment exposed to the sun for a long time, the plate will be prone to discoloration.

The problem encountered during the extrusion of the forex board.

In the process of forex board extrusion, the problems encountered can be classified into five categories: one is the problem of social stability and development; the other is the problem of melt strength; the third is the problem of lubrication; The fourth is the problem of risk dispersion; The fifth is the problem of process temperature control issues. The research on these five types of issues, especially the first three types of issues, will restrict each other and influence each other. The first four problems are fundamental, fundamental problems, and deep-seated problems. Compared with the first four problems, the process temperature control of the forex board is more intuitive, which is a superficial problem, but poor temperature control will induce fundamental problems. As the processing temperature increases, the stabilization time of the material decreases, and stability problems arise. The original lubrication balance is broken and the external lubrication is insufficient. Especially in the later stage, the amount of external lubrication should be increased. The increase in temperature will also lead to a decrease in melt strength, an increase in cells, a reduction in the number of cells, brittleness, and fracture of the sheet, and a screw with weak dispersing ability. Phenomenon.

For more forex board-related questions, please contact us. Years of accumulated R&D and production experience, to provide you with more product services and technical support! Our official website is https://www.jutu.com.cn/.